Skip to main content

Install the M.2 boot adapter

Use this information to install the M.2 boot adapter.

Before you install the M.2 boot adapter, complete the following steps:

  1. Read the following sections to ensure that you work safely.

  2. Turn off the server. Disconnect the power cords and all external cables (see Power off the server).

Important

  • Boot drives for VMware ESXI: For VMware ESXi boot support, only certain M.2 drives are supported, based on their endurance. For more specific information, see Lenovo support tip HT512201.

  • The M.2 drives on opposite sides of the adapter must be of the same form factor (that is, the same physical length) because they share the same mounting clip.

    For more details about the M.2 drive and slot numbering, see M.2 drive and slot numbering.

For more information about the M.2 adapter, see M.2 boot adapter.

Procedure

Align the M.2 boot adapter with the connector on the system board, and press the adapter straight into the connector.
Figure 1. M.2 boot adapter installation
M.2 boot adapter installation
After you install the M.2 boot adapter, complete the following steps:

  1. Install the intrusion switch (see Install the intrusion switch cable).

  2. Install the node if needed (see Install a node).

  3. Reconnect power cords and all external cables.

Demo video