Skip to main content

Install the rack latches

Use this information to install the rack latches.

To install the rack latches, complete the following steps:

  1. On each side of the server, align the rack latch with the pin on the chassis. Then, press the rack latch onto the chassis and slightly slide it forward as shown.
    Figure 1. Rack latch installation
    Rack latch installation

  2. Install the two screws to secure the rack latch on each side of the server.
    Figure 2. Rack latch screws installation
    Rack latch screws installation

After you finish
  1. Install the ID label plate to the right rack latch as shown.
    Figure 3. ID label plate installation
    ID label plate installation

  2. Complete the parts replacement. See Complete the parts replacement.

Demo video

Watch the procedure on YouTube