The following information is a summary of the features and specifications of the server. Depending on the model, some features might not be available, or some specifications might not apply.
Table 1. Server specifications
Specification
Description
Dimension
1U
Height: 43.0 mm (1.69 inches)
Width:
With rack latches: 482.0 mm (19.0 inches)
Without rack latches: 434.4 mm (17.1 inches)
Depth: 778.3 mm (30.6 inches)
Note
The depth is measured with rack latches and power supply installed, but without security bezel installed.
Package weight
Up to 19.2 kg (42.3 lb)
Processor
One AMD® EPYC™ 7002 or 7003 processor
Designed for Land Grid Array (LGA) 4094 (SP3) socket
Seven dual-rotor hot-swap fans (including one redundant fan rotor)
Power supplies
One or two hot-swap power supplies for redundancy support:
550-watt ac 80 PLUS Platinum
750-watt ac 80 PLUS Platinum
750-watt ac 80 PLUS Titanium
1100-watt ac 80 PLUS Platinum
Minimal configuration for debugging
One processor in processor socket 1
One memory module in slot 1
One power supply
One HDD drive or one M.2 drive (if OS is needed for debugging)
Six system fans (depending on the configuration)
Acoustical noise emissions
The declared acoustic noise levels are based on below configurations, which may change depending on configurations and conditions:
Config.
Typical
Storage rich
GPU rich
CPU
1 x 155 W
1 x 155 W
1 x 155 W
DIMM
8 x 32 GB
16 x 64 GB
16 x 64 GB
Ethernet
X710-T2L OCP
10 GbE BASE-T 4-port PCIe
10 GbE BASE-T 4-port PCIe
PSU
2 x 750 W
2 x 750 W
2 x 1100 W
RAID
530-8i RAID
NA
930-16i RAID
Drive
8 x 2.5'' HDD
16 x 2.5'' NVMe SSD
10 x 2.5'' HDD
GPU
NA
NA
2 x T4 GPU
Acoustic noise levels:
Sound power levels (LWA,m)
Status
Typical
Storage rich
GPU rich
Idling
5.7 Bel
7.0 Bel
7.0 Bel
Operating
5.9 Bel
7.2 Bel
8.5 Bel
Sound pressure level (LpA,m)
Status
Typical
Storage rich
GPU rich
Idling
41 dBA
54 dBA
54 dBA
Operating
43 dBA
56 dBA
69 dBA
Note
These sound levels were measured in controlled acoustical environments according to procedures specified by ISO7779 and are reported in accordance with ISO 9296.
Government regulations (such as those prescribed by OSHA or European Community Directives) may govern noise level exposure in the workplace and may apply to you and your server installation. The actual sound pressure levels in your installation depend upon a variety of factors, including the number of racks in the installation; the size, materials, and configuration of the room; the noise levels from other equipment; the room ambient temperature, and employee's location in relation to the equipment. Further, compliance with such government regulations depends on a variety of additional factors, including the duration of employees' exposure and whether employees wear hearing protection. Lenovo recommends that you consult with qualified experts in this field to determine whether you are in compliance with the applicable regulations.
Electrical input
Power supply
100–127 V ac (50–60 Hz)
200–240 V ac (50–60 Hz)
240 V dc*
550-watt 80 PLUS Platinum
Yes
Yes
Yes
750-watt 80 PLUS Platinum
Yes
Yes
Yes
750-watt 80 PLUS Titanium
No
Yes
Yes
1100-watt 80 PLUS Platinum
Yes
Yes
Yes
CAUTION
240 V dc input (input range: 180-300 V dc) is supported in Chinese Mainland ONLY. Power supply with 240 V dc input cannot support hot plugging power cord function. Before removing the power supply with dc input, please turn off server or disconnect dc power sources at the breaker panel or by turning off the power source. Then, remove the power cord.
Environment
The server is supported in the following environment:
Note
This server is designed for standard data center environment and recommended to be placed in industrial data center.
Air temperature:
Operating:
ASHRAE class A2: 10–35°C (50–95°F); when the altitude exceeds 900 m (2953 ft), the maximum ambient temperature value decreases by 1°C (1.8°F) with every 300 m (984 ft) of altitude increase.
ASHRAE class A3: 5–40°C (41–104°F); when the altitude exceeds 900 m (2953 ft), the maximum ambient temperature value decreases by 1°C (1.8°F) with every 175 m (574 ft) of altitude increase.
ASHRAE class A4: 5–45°C (41–113°F); when the altitude exceeds 900 m (2953 ft), the maximum ambient temperature value decreases by 1°C (1.8°F) with every 125 m (410 ft) of altitude increase.
Server off: 5–45°C (41–113°F)
Shipping or storage: -40–60°C (-40–140°F)
Maximum altitude: 3050 m (10 000 ft)
Relative humidity (non-condensing):
Operating:
ASHRAE Class A2: 8%–80%, maximum dew point: 21°C (70°F)
ASHRAE Class A3: 8%–85%, maximum dew point: 24°C (75°F)
ASHRAE Class A4: 8%–90%, maximum dew point: 24°C (75°F)
Shipment or storage: 8%–90%
Particulate contamination
Attention
Airborne particulates and reactive gases acting alone or in combination with other environmental factors such as humidity or temperature might pose a risk to the server. For information about the limits for particulates and gases, see Particulate contamination
Your server complies with ASHRAE class A2 specifications. The server performance might be impacted when the operating temperature is outside the ASHRAE A2 specifications. Server model with the following configurations complies with ASHRAE class A3 and class A4 specifications:
The processor TDP is 120/155 watts.
There is no NVMe drive, rear drive cage, M.2 drive, GPU adapter, Ethernet adapter of 10 GbE or higher, or PCIe NVMe adapter installed.
Note
Server model with 2 port/4 port 1G OCP 3.0 Ethernet adapter installed can comply with ASHRAE class A3 and class A4 specifications.
Particulate contamination Attention: Airborne particulates (including metal flakes or particles) and reactive gases acting alone or in combination with other environmental factors such as humidity or temperature might pose a risk to the device that is described in this document.