CFF 16i RAID/HBA adapter + CFF expander
Front backplanes: 24 x 2.5-inch SAS/SATA
From | To |
---|---|
Backplane 1: SAS | CFF expander: C0 |
Backplane 2: SAS | CFF expander: C1 |
Backplane 3: SAS | CFF expander: C2 |
CFF expander: RAID/HBA | CFF 16i RAID/HBA adapter: C0, C1 |
CFF 16i RAID/HBA adapter: MB (CFF input) | Onboard: PCIe 3 |
CFF 16i RAID/HBA adapter: PWR | Onboard: RAID PWR |
CFF expander: PWR | Onboard: EXP PWR |
Connections between connectors: 1 ↔ 1, 2 ↔ 2, 3 ↔ 3, ... n ↔ n
Note
The CFF adapter in the following illustration might look slightly different from your CFF adapter, but the cable connections are the same.
Figure 1. Cable routing for the 24 x 2.5-inch SAS/SATA configuration with one CFF 16i RAID/HBA adapter and one CFF expander
Rear backplane: 4 x 2.5-inch SAS/SATA
The following shows the cable connections for the 4 x 2.5-inch SAS/SATA rear backplane if installed.
From | To |
---|---|
Backplane 4: SAS | CFF expander: C3 |
Backplane 4: PWR | Riser 1: PWR1, PWR2 |
Connections between connectors: 1 ↔ 1, 2 ↔ 2, 3 ↔ 3, ... n ↔ n
Figure 2. Cable routing for the 4 x 2.5-inch SAS/SATA rear backplane
Give documentation feedback