Onboard connectors + 8i RAID adapter (Tri-mode)
The following shows the cable connections for the 8 x 2.5-inch SAS/SATA + 8 x 2.5-inch AnyBay configuration with one Tri-mode 8i RAID adapter for U.3 drives.
From | To |
---|---|
Backplane 1: SAS | Onboard: SATA 0, SATA 1 |
Backplane 2: SAS | Tri-mode 8i RAID adapter on PCIe slot 2: C0 |
Connections between connectors: 1 ↔ 1, 2 ↔ 2, 3 ↔ 3, ... n ↔ n
Figure 1. Cable routing for the 8 x 2.5-inch SAS/SATA + 8 x 2.5-inch AnyBay configuration with one Tri-mode 8i RAID adapter
Give documentation feedback