Disassemble the system board assembly for Compute Complex Neptune Core Module

Follow the instructions in this section to disassemble the system board assembly for Compute Complex Neptune Core Module before recycling.

Procedure

1. Identify the screws listed below and pay attention to their quantity. Remove the screws to separate the processor board from the supporting metal sheet.

   Table 1. Screw and tool information

   Screw type		Quantity	Tool type
   1		4	#2 Phillips screwdriver
   2		1
   3		1
   4		1
   5		2

   Figure 1. Disassembling the system board assembly

   
   
   
2. Separate the processor board from the supporting metal sheet.
   Figure 2. Separating the processor board
   
   
3. Identify the screw listed below and pay attention to the quantity. Put the processor board upside down, and remove the screws to separate the VR cold plate from the processor board.

   Table 2. Screw and tool information

   Screw type		Quantity	Tool type
   1		4	#2 Phillips screwdriver

   Figure 3. Disassembling the VR cold plates

   
   
   
4. Remove both VR cold plates 1 2 as illustrated below.
   Figure 4. Disassembling the VR cold plates