RAID super capacitor modules
This section provides cable routing information for RAID super capacitor modules.
The cable routing depends on the locations of RAID super capacitor modules:
Note
An extension cable is provided for each RAID super capacitor module for connection.
Figure 1. Connecting the RAID super capacitor module to the RAID adapter
Cable routing for RAID super capacitor modules on the standard air baffle
Figure 2. Cable routing for RAID super capacitor modules on the standard air baffle
From | To |
---|---|
1 Super capacitor 1 cable | Super capacitor connector on the RAID adapter on the internal riser card |
2 Super capacitor 2 cable | Super capacitor connector on the RAID adapter in slot 1 on riser card 1 |
3 Super capacitor 3 cable | Super capacitor connector on the RAID adapter in slot 2 on riser card 1 |
4 Super capacitor 4 cable | Super capacitor connector on the RAID adapter in slot 3 on riser card 1 |
Cable routing for RAID super capacitor modules on the middle drive cage
Figure 3. Cable routing for RAID super capacitor modules on the middle drive cage
From | To |
---|---|
1 Super capacitor 1 cable | Super capacitor connector on the RAID adapter on riser card 1 |
2 Super capacitor 2 cable | Super capacitor connector on the RAID adapter on riser card 2 |
Cable routing for RAID super capacitor modules on the internal riser kit
Figure 4. Cable routing for RAID super capacitor modules on the internal riser kit
From | To |
---|---|
1 Super capacitor 1 cable | Super capacitor connector on the RAID adapter on the internal riser card |
2 Super capacitor 2 cable | Super capacitor connector on the RAID adapter on riser card 1 |
Give documentation feedback