FQXSPSD2000I : The [StorageVolumeElementName] has been removed from unit [PhysicalPackageElementName].
The [StorageVolumeElementName] has been removed from unit [PhysicalPackageElementName].
This message is for the use case when an implementation has detected a Drive has been Removed.
System - Other
SNMP Trap ID
Automatically Notify Support
Complete the following steps until the problem is solved:
- If drive was intentionally removed, make sure that there is a filler in the drive bay.
- Make sure that the drive is correctly seated.
- If drive is correctly seated, replace the drive.