Install an OCP module
Follow instructions in this section to install an OCP module.
About this task
Attention
- Read Installation Guidelines and Safety inspection checklist to ensure that you work safely.
- Touch the static-protective package that contains the component to any unpainted metal surface on the server; then, remove it from the package and place it on a static-protective surface.
Firmware and driver download: You might need to update the firmware or driver after replacing a component.
Go to Drivers and Software download website for ThinkSystem SR850 V3 to see the latest firmware and driver updates for your server.
Go to Update the firmware for more information on firmware updating tools.
Procedure
- If the OCP is covered with a OCP filler, remove the filler from the chassis first.
- Install the OCP module.
Slide the OCP module into the slot until it is fully seated.
Tighten the thumbscrew to secure the OCP module.Figure 1. OCP module installation
Give documentation feedback