Remove the external diagnostics handset
Follow instructions in this section to remove the external diagnostics handset.
About this task
To avoid possible danger, read and follow the following safety statement.
- S014
CAUTIONHazardous voltage, current, and energy levels might be present. Only a qualified service technician is authorized to remove the covers where the label is attached. - S017
CAUTIONHazardous moving fan blades nearby. Keep fingers and other body parts away. - S033
CAUTIONHazardous energy present. Voltages with hazardous energy might cause heating when shorted with metal, which might result in spattered metal, burns, or both.
Attention
- Read Installation Guidelines and Safety inspection checklist to ensure that you work safely.
- Power off the server and peripheral devices and disconnect the power cords and all external cables. See Power off the server.
Procedure
Press the plastic clip on the plug forward.
Pull to disconnect the cable from the server.Figure 1. Disconnecting the external diagnostics handset cable
After you finish
If you are instructed to return the component or optional device, follow all packaging instructions, and use any packaging materials for shipping that are supplied to you.
Demo video
Give documentation feedback