Install server hardware options in the server
Follow the instructions in this section to install server hardware options in the server.
- Install the dual-rotor fan module upgrade kit
Follow instructions in this section to install the dual-rotor fan module upgrade kit. - Remove the fan cage assembly
Follow instructions in this section to remove the fan cage assembly. - Install a drive backplane carrier assembly
Follow instruction in this section to install a drive backplane carrier assembly. - Remove the PCIe riser assembly
Follow instructions in this section to remove the PCIe riser assembly. - Install an adapter
Follow the instructions in this section to install an adapter. - Install the OCP Ethernet adapter
Follow instructions in this section to install the OCP Ethernet adapter. - Install the PCIe riser assembly
Follow instructions in this section to install the PCIe riser assembly. - Remove the system board air baffle
Follow instructions in this section to remove the system board air baffle. - Remove the processor and memory expansion tray
Follow instructions in this section to remove the processor and memory expansion tray. - Install a processor-heat-sink module
The processor and heat sink are removed together as part of a processor-heat-sink-module (PHM) assembly. PHM installation requires a Torx T30 driver. - Install a memory module
Follow instructions in this section to install a memory module. - Install the processor and memory expansion tray
Follow instructions in this section to install the processor and memory expansion tray. - Install the fan cage assembly
Follow instructions in this section to install the fan cage assembly.
Give documentation feedback