Install the processor and memory expansion tray

Follow instructions in this section to install the processor and memory expansion tray.

Procedure

1. Make sure the expansion tray air baffle is installed on the system board. If not, install it.
   Attention

   Air baffle is required for airflow that creates proper cooling. Make sure to install proper air baffles for system configuration before the power is turned on.

   Figure 1. Installing the expansion tray air baffle
   
   
2. Align the processor and memory expansion tray with the two pairs of guides on the sides, and lower it into the chassis.
   Figure 2. Installing the processor and memory expansion tray
   
   
3. If you plan to install memory modules and PHMs, do it now (see Install a memory module and Install a processor and heat sink).
4. If applicable, route the two PCIe cables through the cable guides, and connect them to the expansion tray.
   Figure 3. Connecting cables to the expansion tray
   
   
5. Secure the processor and memory expansion tray.
   Figure 4. Securing the processor and memory expansion tray

   
   
   

   • Rotate the handle all the way down. This connects and fixes the expansion tray to the system board.
   • Pull the retaining tab back to secure the handle.