FQXSPIO0001L : The connector [PhysicalConnectorElementName] has encountered a configuration error.
The connector [PhysicalConnectorElementName] has encountered a configuration error.
This message is for the use case when an implementation has detected an Interconnect Configuration Error.
Severity
Error
Alert Category
Critical - Other
Serviceable
Yes
SNMP Trap ID
50
Automatically Notify Support
Yes
User Action
Complete the following steps until the problem is solved:
- Make sure USB cable from front I/O module to system board is securely connected.
- Replace the front operator panel if the problem still exist.
Give documentation feedback