Drive backplates/backplanes
The illustrations in this section identify the connectors on the drive backplates/backplanes.
Following are the drive backplate/backplanes that are supported by this server:
3.5-inch simple-swap backplate (Bay 0-3)
Bay number in the lower drive cage | |
1 Signal/SATA connector | SATA 3 |
2 Signal/SATA connector | SATA 2 |
3 Signal/SATA connector | SATA 1 |
4 Signal/SATA connector | SATA 0 |
3.5-inch simple-swap backplate (Bay 4-7 without optical disk drive)
Bay number in the lower drive cage | |
1 Signal/SATA connector | SATA 7 |
2 Signal/SATA connector | SATA 6 |
3 Signal/SATA connector | SATA 5 |
4 Signal/SATA connector | SATA 4 |
3.5-inch simple-swap backplate (Bay 4-5 with optical disk drive)
Bay number in the lower drive cage | |
1 Signal/SATA connector | SATA 5 |
2 Signal/SATA connector | SATA 4 |
3.5-inch hot-swap backplane
1 Power connector | 2 SAS/SATA connector |
2.5-inch hot-swap backplane
1 Power connector | 3 SAS/SATA 0 connector |
2 SAS/SATA 1 connector |
Give documentation feedback