Sixteen 2.5-inch hot-swap drives
Use this section to understand the cable routing for server models with sixteen 2.5-inch hot-swap drives.
Note
- Connections between connectors; 1↔1, 2↔2, 3↔3, ... n↔n
- When routing the cables, ensure that all cables are routed appropriately through the cable guides.
16i RAID adapter
 | ||
| From | To | Cable |
| 1 BP1 power connector | System board: BP 1 power connector | 2x8 to 2x6 pin, 350mm |
| 2 BP1 SAS/SATA 0 connector |
| 450mm |
| 3 BP1 SAS/SATA 1 connector |
| 400mm |
| 4 BP2 power connector | System board: BP 2 power connector | 230mm |
| 5 BP2 SAS/SATA 0 connector |
| 500mm |
| 6 BP2 SAS/SATA 1 connector |
| 450mm, with 2.5'' SAS1 label |
Two 8i RAID adapters
 | ||
| From | To | Cable |
| 1 BP1 power connector | System board:BP 1 power connector | 2x8 to 2x6 pin, 350mm |
| 2 BP1 SAS/SATA 0 connector |
| 450 mm |
| 3 BP1 SAS/SATA 1 connector |
| 400 mm |
| 4 BP2 power connector | System board: BP 2 power connector | 230 mm |
| 5 BP2 SAS/SATA 0 connector |
| 500 mm |
| 6 BP2 SAS/SATA 1 connector |
| 450 mm, with 2.5" SAS1 label |
Give documentation feedback