Four 3.5-inch hot-swap drives
Use this section to understand the cable routing for server models with four 3.5-inch hot-swap drives.
Note
- Connections between connectors; 1↔1, 2↔2, 3↔3, ... n↔n
- When routing the cables, ensure that all cables are routed appropriately through the cable guides.
Software RAID
 | ||
| From | To: System board | Cable |
| 1 BP1 power connector | BP 1 power connector | 2x8 pin to 2x6 pin (350mm) |
| 2 BP1 SAS/SATA connector | SATA 0-3 | 300mm |
8i RAID adapter
 | ||
| From | To | Cable |
| 1 BP1 power connector | System board: BP 1 power connector | 2x8 pin to 2x6 pin (350mm) |
| 2 BP1 SAS/SATA connector |
| 450mm |
Give documentation feedback