Four 3.5-inch and eight 2.5-inch hot-swap drives

Use this section to understand the cable routinGen for server models with four 3.5-inch and eiGen ht 2.5-inch hot-swap drives.

16i RAID adapter​

From	To: System board	Cable
1 BP1 power connector	System board BP 1 power connector	2x8 to 2x6 pin, 350 mm
2 BP1 SAS/SATA connector	Gen 3: C0	450mm
3 BP2 power connector	System board BP 2 power connector	230mm
4 BP2 SAS/SATA 0 connector	Gen 3: C1	500mm
5 BP2 SAS/SATA 1 connector	Gen 3: C2	450mm, with 2.5'' SAS1 label

Two 8i RAID adapters​

From	To	Cable
1 BP1 power connector	System board: BP 1 power connector	2x8 to 2x6 pin, 350mm
2 BP1 SAS/SATA connector	Gen 3: C0, slot 2	450mm
3 BP2 power connector	System board: BP 2 power connector	230mm
4 BP2 SAS/SATA 0 connector	Gen 3: C0, slot 4	500mm
5 BP2 SAS/SATA 1 connector	Gen 3: C1, slot 4	450mm, with 2.5'' SAS1 label