Eight 3.5-inch hot-swap drives
Use this section to understand the cable routing for server models with eight 3.5-inch hot-swap drives.
Note
- Connections between connectors; 1↔1, 2↔2, 3↔3, ... n↔n
- When routing the cables, ensure that all cables are routed appropriately through the cable guides.
Software RAID
 | ||
| From | To: System board | Cable |
| 1 BP1 power connector | BP 1 power connector | 2x8 to 2x6 pin, 350mm |
| 2 BP2 power connector | BP 2 power connector | 310mm |
 | ||
| From | To: System board | Cable |
| 3 BP2 SAS/SATA connector |
| 370/370/350/340/400mm |
| 4 BP1 SAS/SATA connector | SATA 0-3 | |
8i RAID adapter
 | ||
| From | To | Cable |
| 1 BP1 power connector | System board: BP 1 power connector | 2x8 to 2x6 pin, 350 mm |
| 2 BP1 SAS/SATA connector |
|
|
| 3 BP2 power connector | System board: BP 2 power connector | 310 mm |
| 4 BP2 SAS/SATA connector |
|
|
Give documentation feedback