Skip to main content

Server models with four 3.5-inch hot-swap drives

Use this section to understand the cable routing for server models with four 3.5-inch hot-swap SAS/SATA drives.

Server model: four 3.5-inch SAS/SATA drives, one 8i RAID adapter​

Note

  • Ensure that all cables are routed through the correct cable clips.

  • Broken lines indicate the hidden parts.

Figure 1. Cable routing for server models with four 3.5-inch SAS/SATA drives and one 8i RAID adapter
Cable routing for server models with four 3.5-inch SAS/SATA drives and one 8i RAID adapter

CableFromTo
1 SAS signal cable*SAS connector on the backplane
HBA/RAID adapter:

  • Gen 3: C0

  • Gen 4: C0

2 Power cablePower connector on the backplaneBackplane 1 power connector on the system board
Note
*When Gen 4 HBA/RAID adapter is installed, ensure you use Gen 4 SAS signal cable (ThinkSystem ST550 3.5" SAS/SATA 4-Bay X40 RAID Cable Kit).