Skip to main content

Sideband Interface (NC-SI)

This section is used to configure Network Controller Sideband Interface (NCSI) settings.

To open the Sideband Interface (NC-SI) page, click Settings > Network Settings > Sideband Interface (NC-SI).

The fields of the Sideband Interface (NC-SI) page are explained below.
  • NCSI Mode:

    • If you select Auto Failover Mode, the NCSI interface and other settings will be configured automatically.

    • If you select Manual Switch Mode, you are allowed to configure the below settings.

  • NCSI Interface: Select the NSCI interface for which you need to configure NCSI settings.

  • Package ID: Select the package ID to be configured for the selected interface.

  • Channel Number: Select the channel number to be configured for the selected interface.

  • Save: Save the settings.