Skip to main content

Network Link Configuration

This section is used to configure the network link settings for available network interfaces.

To open the Network Link Configuration page, click Settings > Network Settings > Network Link Configuration.

The fields of the Network Link Configuration page are explained below.

  • LAN Interface: Select the required network interface from the list for which the link speed and duplex mode are to be configured.

  • Auto Negotiation: This option is enabled to allow the device to perform automatic configuration to achieve the best possible mode of operation (speed and duplex) over a link.
    Note

    The Link Speed and Duplex Mode will be active only when Auto Negotiation is disabled.

  • Link Speed: Link speed options depend on the network interface capabilities, which can be 10, 100, or 1000 Mbps.
    Note

    Link speed of 1000 Mbps is not applicable when Auto Negotiation is disabled.

  • Duplex Mode: This field could be either Half Duplex or Full Duplex.

  • NCSI Interface: The NCSI interface status could be either Enabled or Disabled for the selected LAN interface.

  • Save: Save the settings.