806f011b-0701ffff : The connector [PhysicalConnectorElementName] has encountered a configuration error.
The connector [PhysicalConnectorElementName] has encountered a configuration error.
This message is for the use case when an implementation has detected an Interconnect Configuration Error.
May also be shown as 806f011b0701ffff or 0x806f011b0701ffff
Severity
Error
Alert Category
Critical - Other
Serviceable
Yes
SNMP Trap ID
50
Automatically Notify Support
Yes
User Response
If the specified sensor is front USB connector, reset the front USB cable on the system board. If the specified sensor is front video connector, reset the front video cable in the system board. If the specified sensor is PwrPaddle cable, complete the following steps until problem is solved:
- Reseat the power paddle cable on the system board.
- Replace the power paddle cable.
- (Trained technician only) Replace the supercap n. (n = supercap number)
- (Trained technician only) Replace the system board.
Give documentation feedback