Skip to main content

806f0107-2584ffff : An over-temperature condition has been detected on [ProcessorElementName].

An over-temperature condition has been detected on [ProcessorElementName].

The temperature of the specified microprocessor has risen above its specified threshold.

May also be shown as 806f01072584ffff or 0x806f01072584ffff

Severity

Error

Alert Category

Critical - Temperature

Serviceable

Yes

CIM Information

Prefix:PLAT

and ID:0036

SNMP Trap ID

0

Automatically Notify Support

No

User Response

Complete the following steps until the problem is solved:

  1. Check the Chassis Management Module or Flex System Manager event log for any fan- or cooling-related issues.
  2. Make sure that the airflow at the front and rear of the chassis is not obstructed and that fillers are in place and correctly installed.
  3. Make sure that the room temperature is within operating specifications.
  4. Make sure that the heat sink for the specified microprocessor is securely installed.
  5. Make sure that the heat sink for the specified microprocessor is installed correctly and the thermal material is correctly applied.
  6. Replace the specified microprocessor.