Installing the media tray

You can install the media tray while the BladeCenter S system is powered on. To install it, slide it into the BladeCenter S chassis and close the release handles.

Important

If you are installing the media tray in a BladeCenter S chassis in which SAS RAID controller modules are installed, refer to the BladeCenter S SAS RAID Controller Module Installation and User's Guide for additional steps that might need to be performed.

1. Open the release handles (rotate the top handle up and the bottom handle down).
2. Slide the media tray into the BladeCenter S chassis until it stops.
3. Close the release handles (rotate the top handle down and the bottom handle up).