Skip to main content

Defining management-interface settings

You can define hostnames, IP address, domain name system (DNS), interface speed, and port assignments for the management interface by creating a management interface pattern.

Procedure

Complete the following steps to create a management-interface pattern.

Note
Duplex settings are not supported by server patterns.

  1. From the Lenovo XClarity Administrator menu bar, click Provisioning > Patterns. The Configuration Patterns: Patterns page is displayed.
  2. Click the Category Patterns tab.
  3. Click the Management Interface Patterns vertical tab, and then click the Create icon (Create icon).
    New Server Pattern
    You can also create a new management-interface pattern from the Firmware settings page of the wizard by clicking the Create icon (Create icon) next to the Management Interface selection.
  4. In the New Management Interface Pattern dialog, specify the following information.
    • Enter a name and description for the pattern.

    • Click the Hostname tab, and choose whether to automatically generate hostnames. If you click Custom, you can specify how names are to be generated when the pattern is deployed. If you click Disable, the hostname remains unchanged on each server when the pattern is deployed.

      Hostnames are limited to 63 English characters by the baseboard management controller. Automatically generated names are truncated to 63 characters.

    • Click the Management IP Addresses tab, and configure IPv4 and IPv6 addresses settings.

      Important
      IPv4 must be enabled on all XCC ports in the configuration pattern. Disabling IPv4 using configuration patterns disables the entire Ethernet port, including IPv6.
      For IPv4 addresses, you can choose one of the following options:
      • Obtain dynamic IP address from DHCP server.
      • First by DHCP. If it is not successful, obtain a static IP address from the address pool.
      • Obtain a static IP address from the address pool.
      For IPv6 addresses, you can choose to:
      • Use the stateless address auto configuration.

      • Obtain a dynamic IP address from a DHCP server.

      • Obtain a static IP address from the address pool.

      In the Domain Name System (DNS) tab, choose to enable or disable the Dynamic Domain Name Service (DDNS). If you enable DDNS, you can choose one of the following options:
      • Obtain domain name from DHCP server.
      • Specify a domain name.

      For applicable ThinkSystem servers that have XCCs with two ports, you can choose to apply settings to the both ports.

    • Click the Interface Settings tab, and specify the maximum transmission unit (MTU). The default is 1500.

    • Click the Port Assignments tab, and specify the numbers to use for the following ports:

      • HTTP
      • HTTPS
      • Telnet CLI
      • SSH CLI
      • SNMP agent
      • SNMP traps
      • Remote control console
      • CIM over HTTP
      • CIM over HTTPS
  5. Click Create.

Results

The new pattern is listed on the Management Interface Patterns tab in the Configuration Patterns: Category Patterns page:
Illustrates the list of customized management interface patterns on the Configuration Patterns: Category Patterns page.
From this page, you can also perform the following actions on a selected category pattern:
  • Modifying current pattern settings by clicking the Edit icon (Edit icon).
  • Copy an existing pattern by clicking the Copy icon (Edit icon).
  • Delete a pattern by clicking the Delete icon (Delete icon).
  • Rename a pattern by clicking the Rename icon (Rename icon).
  • Import or export patterns (see Exporting and importing server and category patterns).