Skip to main content

Install the rear dust filter

Follow instructions in this section to install the rear dust filter.

About this task

Attention
SE100 supports a dust filter installed at rear of the expansion kit. The dust filter has a Minimum Efficiency Rating Value (MERV) of 5, per ASHRAE 52.2-2017 / 80% Average Arrestance per ASHRAE 52.1-1992.

Procedure

  1. Place the dust filter into the dust filter holder.
    Figure 1. Installing the dust filter

  2. Align the dust filter holder with the slot on the rear side of the expansion kit; then slide the dust filter holder into the slot until the holder stops.
    Figure 2. Installing the dust filter holder

After you finish

  1. Install the expansion top cover. See Install the expansion top cover.
  2. Complete the parts replacement. See Complete the parts replacement.