GPU power cable routing

Follow the instructions in this section to learn how to do cable routing for the GPU power cables.

This section provides cable routing instruction for GPU power cable, 450mm.

Complete the following procedure to route the cables properly.

Procedure

1. Connect the GPU power cable to the corresponding connector on the power distribution board.
   • For GPU adapter on PCIe riser 1: 1 GPU 1 power connector
   • For GPU adapter on PCIe riser 2: 2 GPU 2 power connector
2. Secure the GPU power cable in cable clip D.
3. Proceed to connect the cable to the GPU adapter on PCIe riser assembly, and install the assembly. See Install the PCIe riser assembly.
   Note

   Make sure to manage all the GPU power cables into the cable guide of the processor air baffle when installing the PCIe assembly.

   Figure 1. GPU power cables on processor air baffle