Remove the security bezel keylock bracket
Follow instructions in this section to remove the security bezel keylock bracket.
About this task
Attention
Read Installation Guidelines and Safety inspection checklist to ensure that you work safely.
If applicable, remove the security bezel. See Remove the security bezel.
Power off the server and peripheral devices and disconnect the power cords and all external cables. See Power off the server.
If the server is installed in a rack, remove the server from the rack. See Remove the server from the rack.
Procedure
- Loosen the screw that secures the security bezel keylock bracket.Figure 1. Removing the security bezel keylock bracket
- Pinch and pivot the security bezel keylock bracket away from the chassis; then, remove the bracket.Figure 2. Removing the security bezel keylock bracket
After this task is completed
- Install a replacement unit. See Install the security bezel keylock bracket.
If you are instructed to return the component or optional device, follow all packaging instructions, and use any packaging materials for shipping that are supplied to you.
Demo Video
Give documentation feedback