Skip to main content

Remove the security bezel

Follow instructions in this section to remove the security bezel.

About this task

Attention

Procedure

  1. Unlock the security bezel with the corresponding key.
  2. Remove the security bezel.
    1. Press and hold the release latches on both sides.
    2. Slide the security bezel away from the chassis.
    Figure 1. Removing the security bezel

After this task is completed

  • If necessary, proceed to replace the dust filter. See Remove the dust filter.

  • If the server will operate without security bezel, install security bezel slot fillers to protect the slots. See Front I/O fillers to identify the fillers.

  • If you are instructed to return the component or optional device, follow all packaging instructions, and use any packaging materials for shipping that are supplied to you.

Demo Video

Watch the procedure on YouTube