Skip to main content

Install the internal riser assembly

Use this information to install the internal riser assembly.

To install the internal riser assembly, complete the following steps:

  1. Install the internal riser assembly and install the super capacitor on the internal riser assembly. See Install a super capacitor module on the M.2/riser support bracket.
  2. Align the pins and connectors of the internal riser assembly with the holes and connectors on the chassis, and then secure the assembly in place.
    Figure 1. Internal riser assembly installation
    Install the internal riser assembly on the chassis.

  3. Tighten the captive screw to further secure the assembly.
After you finish

Complete the parts replacement. See Complete the parts replacement.

Demo video

Watch the procedure on YouTube