Install the security bezel

Use this information to install the security bezel.

Read the installation Guidelines

Before installing the security bezel, if you have removed the rack latches, reinstall them. See Install the rack latches.

To install the security bezel, complete the following steps:

1. If the key is held inside the security bezel, remove it out of the security bezel.
   Figure 1. Key removal
   

   

   
   
2. Insert the tab on the security bezel into the slot on the right side of the chassis. Then, press and hold the blue release latch and pivot the security bezel inward until it clicks into place.
   Figure 2. Security bezel installation
   

   

   
   
3. Use the key to lock the security bezel.
   Figure 3. Security bezel lockup