Skip to main content

Front 8 x 3.5" SAS/SATA + 4 x 3.5" AnyBay/NVMe

This topic provides cable routing information for the front 8 x 3.5" SAS/SATA + 4 x 3.5" AnyBay/NVMe configuration.

SAS/SATA cable routing​

Note

  • The location of the adapter and cable connectors on the adapter may differ from those shown in the illustration. For details, see the table below.

  • Cable 2 is not needed in the front 8 x 3.5" SAS/SATA + 4 x 3.5" NVMe configuration.

Figure 1. SAS/SATA cable routing to SFF 16i adapter

From (BP1)To (16i adapter)Cable length
1a SAS 01

  • Gen 4: C0

  • Gen 3: C0C1

  • Gen 4: 900/1020 mm

  • Gen 3: 820/1020 mm

1b SAS 1
2 SAS 22

  • Gen 4: C1

  • Gen 3: C2

900 mm

NVMe cable routing​

Figure 2. NVMe cable routing

From (BP1)To (processor board)Cable length
1 NVMe 8-91 PCIe 4250 mm
2 NVMe 10-112 PCIe 3250 mm