Skip to main content

Top view

This section contains information on the top view of the server.

Note

  • The following illustration shows the top view of the server without any top cover, air baffle, middle cage, or rear cage installed.

  • The illustration shows the server rear configuration with two riser assemblies. The server rear configurations vary by server model. For details, see Rear view.

Top view with standard heat sinks​

Figure 1. Server top view
Top view of the server with typical configuration
Table 1. Component identification (top view)
1 Front backplane(s)2 Intrusion switch
3 System fans4 Memory modules
5 Processor and heat sink6 Riser assemblies
7 Power supply unit8 system board assembly

Top view with DWCM​

Figure 2. Top view with DWCM
Top view with DWCM
Table 2. Components identification (top view with DWCM)
1 Outlet hose2 Inlet hose
3 Hose holder4 Liquid detection sensor module
5 Cold plate assembly6 Riser cage for DWCM