Skip to main content

Remove a system fan

Follow instructions in this section to remove a system fan.

About this task

S033
240VA shock hazard
CAUTION

Hazardous energy present. Voltages with hazardous energy might cause heating when shorted with metal, which might result in spattered metal, burns, or both.

S017
moving parts
CAUTION

Hazardous moving fan blades nearby. Keep fingers and other body parts away.

Attention

  • Read Installation Guidelines and Safety inspection checklist to ensure that you work safely.

  • Prevent exposure to static electricity, which might lead to system halt and loss of data, by keeping static-sensitive components in their static-protective packages until installation, and handling these devices with an electrostatic-discharge wrist strap or other grounding system.

  • When removing a hot-swap fan without powering off the server, do not touch the system fan cage. With power on, complete the replacement within 30 seconds to ensure proper operation.

Procedure

  1. If the server is installed in a rack, slide the server out on its rack slide rails to gain access to the top cover, or remove the server from the rack. See Remove the server from rack.
  2. Remove the top cover. See Remove the top cover.
  3. Remove the system fan.
    Figure 1. Removing the system fan
    System fan removal
    1. Grasp the top of the system fan with your fingers.
    2. Lift the system fan out of the server.
After you finish

  1. Install a new system fan or install a fan filler to cover the place. See Install a system fan.

  2. If you are instructed to return the component or optional device, follow all packaging instructions, and use any packaging materials for shipping that are supplied to you.

Demo video

Watch the procedure on YouTube