Install a fan
Follow instructions in this section to install a fan.
About this task
S002
CAUTION
The power-control button on the device and the power switch on the power supply do not turn off the electrical current supplied to the device. The device also might have more than one power cord. To remove all electrical current from the device, ensure that all power cords are disconnected from the power source.
S014
CAUTION
Hazardous voltage, current, and energy levels might be present. Only a qualified service technician is authorized to remove the covers where the label is attached.
S017
CAUTION
Hazardous moving fan blades nearby. Keep fingers and other body parts away.
S033
CAUTION
Hazardous energy present. Voltages with hazardous energy might cause heating when shorted with metal, which might result in spattered metal, burns, or both.
Attention
- Read Installation Guidelines and Safety inspection checklist to ensure that you work safely.
- Do not mix single rotor fan and dual rotor fan in the same unit of server.
- Touch the static-protective package that contains the component to any unpainted metal surface on the server; then, remove it from the package and place it on a static-protective surface.
Procedure
- Align the fan to the fan slot in the fan cage; then, insert the fan into the fan cage and press it until it clicks into place.Figure 1. Fan installation
Give documentation feedback