Skip to main content

Install the intrusion switch

Follow instructions in this section to install the intrusion switch.

About this task

  • Read Installation Guidelines and Safety inspection checklist to ensure that you work safely.
  • Touch the static-protective package that contains the component to any unpainted metal surface on the server; then, remove it from the package and place it on a static-protective surface.


  1. Push the intrusion switch into the intrusion switch bracket. Make sure the intrusion switch is fully seated in the bracket.
  2. Connect the intrusion switch cable to the system board assembly.
    Figure 1. Intrusion switch installation
    Intrusion switch installation

After you finish

Complete the parts replacement. See Complete the parts replacement.

Demo video

Watch the procedure on YouTube