Skip to main content

Remove the power distribution board

Follow instructions in this section to remove the power distribution board.

About this task

Attention

Read Installation Guidelines and Safety inspection checklist to ensure that you work safely.
Power off the server and peripheral devices and disconnect the power cords and all external cables. See Power off the server.
If the server is installed in a rack, remove it from the rack. See Remove the server from rails.

Procedure

Make preparation for this task.
1. Remove the front top cover. See Remove the front top cover.
2. Remove the rear top cover. See Remove the rear top cover.
Remove the power distribution board.
1. Gently pull and disengage every installed power supply unit.
2. Disconnect the sideband and power cables from the power distribution board.
3. Grasp and lift the power distribution board to remove it.
  Figure 1. Power distribution board removal

After you finish

If you are instructed to return the component or optional device, follow all packaging instructions, and use any packaging materials for shipping that are supplied to you.
If you plan to recycle the component:
1. Remove the four screws that secure the power distribution board to the bracket.
2. Separate the power distribution board from the bracket.
  Figure 2. Power distribution board disassembly
3. Recycle the component in compliance with local regulations.

Demo video

Watch the procedure on YouTube

Give documentation feedback