Four 3.5-inch hot-swap drives
Use this section to understand the cable routing for server models with four 3.5-inch hot-swap drives.
Following are the options available for this configuration:
Software RAID
 | ||
| From | To | |
| 1 | Lower backplane power connector | Backplane 1 power connector |
| 2 | Lower backplane SAS/SATA connector | SATA 0-3 |
One 8i RAID adapter
 | ||
| From | To | |
| 1 | Lower backplane power connector | Backplane 1 power connector |
| 2 | Lower backplane SAS/SATA connector | C0 |
Give documentation feedback