Six 3.5-inch simple-swap drives with ODD/tape drives

Use this section to understand the cable routing for server models with six 3.5-inch simple-swap drives and ODD/tape drives (software RAID).

	From	To		From	To
1	Lower backplate	Backplane 1 power connector	1	Upper backplate	Backplane 2 power connector
			2		SATA 4, 5
2		SATA 0-3	3	ODD/Tape drive power connectors	ODD/tape drive power connector on the system board
			4	ODD/Tape drive SATA connectors	SATA 6, 7