Removing and replacing Tier 1 CRUs
Replacement of Tier 1 CRUs is your responsibility. If IBM installs a Tier 1 CRU at your request, you will be charged for the installation.
The illustrations in this document might differ slightly from your hardware.
- Removing the simple-swap backplate
This procedure applies only to 4U server models with non-hot-swap power supplies. - Replacing the simple-swap backplate
This procedure applies only to 4U server models with non-hot-swap power supplies. - Removing the hot-swap hard disk drive backplane
This procedure applies only to the 5U server model with hot-swap power supplies (Model name: 2582-F4x). - Replacing the hot-swap hard disk drive backplane
This procedure applies only to the 5U server model with hot-swap power supplies (Model name: 2582-F4x). - Removing the front-panel assembly
Use this information to remove the front-panel assembly - Replacing the front-panel assembly
Use this information to replace the front-panel assembly - Removing the front USB connector assembly
Use this information to remove the front USB connector assembly - Replacing the front USB connector assembly
Use this information to replace the front USB connector assembly - Removing the rear adapter retention bracket
This procedure applies only to the 5U server model with hot-swap power supplies (Model name: 2582-F4x). - Replacing the rear adapter retention bracket
This procedure applies only to the 5U server model with hot-swap power supplies (Model name: 2582-F4x). - Removing the hard disk drive cage
This procedure applies only to 4U server models with non-hot-swap power supplies. - Replacing the hard disk drive cage
This procedure applies only to 4U server models with non-hot-swap power supplies. - Removing the non-hot-swap power supply
This procedure applies only to 4U server models with non-hot-swap power supplies. - Replacing the non-hot-swap power supply
This procedure applies only to 4U server models with non-hot-swap power supplies. - Removing the hot-swap power supply
This procedure applies only to the 5U server model with hot-swap power supplies (Model name: 2582-F4x). - Replacing the hot-swap power supply
This procedure applies only to the 5U server model with hot-swap power supplies (Model name: 2582-F4x). - Removing the hot-swap power supply cage
This procedure applies only to the 5U server model with hot-swap power supplies (Model name: 2582-F4x). - Replacing the hot-swap power supply cage
This procedure applies only to the 5U server model with hot-swap power supplies (Model name: 2582-F4x).
Give documentation feedback