Passa al contenuto principale

Snapshot volume – reserved capacity threshold exceeded

A snapshot volume's reserved capacity has exceeded its alert threshold.

Important
  • If you do not resolve this problem, this is the last alert you will receive before the snapshot volume's reserved capacity becomes full.

  • If the snapshot volume's reserved capacity becomes full, it will not have enough capacity to save new data. Therefore, the snapshot volume will continue to fail write requests that require reserved capacity.

  • To resolve this problem, you can either increase the reserved capacity or increase the threshold capacity alert level. Note that increasing the alert threshold will reduce the time you have to respond the next time you receive a threshold exceeded notification.

Recovery Steps

  1. Do you want to increase the snapshot volume's reserved capacity or its alert threshold?

    • If you want to increase the reserved capacity, go to step 2.

    • If you want to increase the alert threshold, go to step 3.

  2. Increase the reserved capacity, and then go to step 4.

    1. Go to Storage > Pools & Volume Groups. Then, select the Increase Capacity tab.

    2. Highlight the affected snapshot volume shown in the Details area.

    3. Select Increase Capacity and increase the capacity appropriately..

    4. Go to step 4.

  3. Increase the alert threshold.

    1. Go to Storage > Pools & Volume Groups. Then, select the Reserved Capacity tab.

    2. Highlight the affected snapshot volume shown in the Details area.

    3. Select View/Edit Settings and adjust the alert threshold to a value higher than its current setting..

  4. Select Recheck to ensure the problem has been resolved.