Перейти к основному содержимому

Drive in pool failed

Important

  • You should replace only one drive at a time, waiting at least 30 seconds between inserting drives.

  • Make sure the replacement drives have a capacity equal to or greater than the failed drives you will remove.

  • You can replace failed drives while the storage array is receiving I/O.

Recovery Steps​

  1. Remove one of the drives shown in the Details area. Its fault indicator light should be lit.

  2. Wait at least 30 seconds, and then insert a new drive. Its fault indicator light may be lit for a short time (one minute or less).

  3. Repeat steps 1 and 2 for each failed drive.

  4. Select Recheck to ensure the problem has been resolved.