Drive in pool failed
Important
You should replace only one drive at a time, waiting at least 30 seconds between inserting drives.
Make sure the replacement drives have a capacity equal to or greater than the failed drives you will remove.
You can replace failed drives while the storage array is receiving I/O.
Recovery Steps
Remove one of the drives shown in the Details area. Its fault indicator light should be lit.
Wait at least 30 seconds, and then insert a new drive. Its fault indicator light may be lit for a short time (one minute or less).
Repeat steps 1 and 2 for each failed drive.
Select Recheck to ensure the problem has been resolved.
フィードバックを送る