Remove the node front cover
Use this information to remove the node front cover.
About this task
To avoid possible danger, read and follow the following safety statement.
- S014
CAUTIONHazardous voltage, current, and energy levels might be present. Only a qualified service technician is authorized to remove the covers where the label is attached. - S033
CAUTIONHazardous energy present. Voltages with hazardous energy might cause heating when shorted with metal, which might result in spattered metal, burns, or both.
Attention
Read the Installation Guidelines to ensure that you work safely.
Procedure
Figure 1. Node front cover removal
Remove the node front cover from the compute node.
Loosen the screw on the node front cover.
Press on the two push points on the node front cover to slide the cover toward the rear of the compute node until it has disengaged from the node. Then, lift the cover away from the node.
Demo video
Give feedback