Skip to main content

Install the VGA cable (3.5-inch HDD model)

Use this information to install the VGA cable for the 3.5-inch HDD model.

Before you install the VGA cable, complete the following steps:
  1. Read the following section(s) to ensure that you work safely.

To install the VGA cable, complete the following steps:

  1. Insert the VGA cable into the slot on the front chassis; then, install the screws to secure the VGA cable.
    Figure 1. VGA cable installation
    VGA cable installation
  2. Connect the VGA cable to the connector on the system board.
    Note
    Make sure the VGA cables is correctly routed as illustrated.
    Figure 2. VGA cable installation
    VGA cable installation
  3. Push the VGA cable cover into the slot until the clips are locked.
    Figure 3. VGA cable installation
    VGA cable installation

After you install the VGA cable, complete the following steps:

  1. Reinstall the air baffle if it was removed (see Install the air baffle).

  2. Install the top cover onto the server (see Install the top cover).

  3. Install the server into the rack if necessary.

  4. Reconnect power cords and all external cables.

Demo video

Watch the procedure on YouTube