Skip to main content

Remove the front operator panel (2.5-inch HDD model)

Use this information to remove the front operator panel (2.5-inch HDD model).

Before you remove the front operator panel (2.5-inch HDD model), complete the following steps:
  1. Read the following section(s) to ensure that you work safely.

  2. Turn off the server. Disconnect the power cords and all external cables (see Power off the server).

  3. If server is installed in a rack, remove the server from the rack.

  4. Remove the top cover (see Remove the top cover).

To remove the front operator panel (2.5-inch HDD model), complete the following steps:

  1. Disconnect the front operator panel cables from the system board.
    Figure 1. Front operator panel (2.5-inch HDD model) cables removal
    Front operator panel (2.5-inch HDD model) cables removal
  2. Remove two screws that secure the front operator panel.
    Figure 2. Screws removal
    Screws removal
  3. Slide the front operator panel out of the server.
    Figure 3. Front operator panel removal
    Front operator panel removal

If you are instructed to return the defective component, please package the part to prevent any shipping damage. Reuse the packaging the new part arrived in and follow all packaging instructions.

Demo video

Watch the procedure on YouTube