FQXSPPW0002L : [PowerSupplyElementName] has Failed.
[PowerSupplyElementName] has Failed.
This message is for the use case when an implementation has detected a Power Supply has failed.
Critical - Power
SNMP Trap ID
Automatically Notify Support
Complete the following steps until the problem is solved:
- Check the PSU LED:
- If AC LED is not lit, check the power cord and input voltage.
- If DC LED is not lit or fault LED is lit, remove and then reinstall the power supply.
- If the problem persists, collect service data log from the XCC WebGUI and contact Lenovo Support.