Skip to main content

FQXSPUN0018J : Sensor [SensorElementName] has transitioned from normal to non-critical state.

Sensor [SensorElementName] has transitioned from normal to non-critical state.

This message is for the use case when an implementation has detected a Sensor transitioned to non-critical from normal.

Severity

Warning

Alert Category

Warning - Other

Serviceable

Yes

CIM Information

Prefix:PLAT

and ID:0520

SNMP Trap ID

60

Automatically Notify Support

No

User Action

Complete the following steps until the problem is solved:

  1. If the sensor is "PFR PCH":
    1. Check if there is a de-asserted event triggered after this event is asserted before entering the OS.
    2. If yes, ignore this event because this problem is fixed by recovery algorithm.
    3. If no, collect service data log right after this event triggered.
    4. Contact Lenovo Support
  2. If the sensor is "RAID Vol State":
    1. Check whether there is any physical drive removed unexpectedly. Make sure that the drives are installed correctly in the same sequence as original VD creation.
    2. If the problem remains the same after physical check, boot the system in OS (if the original OS is corrupted, try to use external storage) to collect LXCE log and FFDC log during the failure.
    3. Contact Lenovo Support.