Skip to main content

10 x 2.5'' NVMe (liquid cooling)

Use this section to understand the cable routing of 10 NVMe front drives for liquid cooling (NeptAir module) configuration with 10 x 2.5'' AnyBay front backplane installed.

Onboard cabling of 10 NVMe drives for liquid cooling (NeptAir module)​

The following table shows the mapping relationship between backplane connectors and system board connectors for onboard configuration.

The following figure illustrates the cable routing for the onboard configuration of 10 x 2.5-inch front NVMe drive bays. Connections between connectors: 1 ↔ 1, 2 ↔ 2, 3 ↔ 3, ... n ↔ n

Figure 1. Onboard cabling of 10 NVMe drives for liquid cooling (NeptAir module)

Table 1. Mapping between one front AnyBay backplane and processor board for onboard configuration
FromTo
1 NVMe 0–11 PCIe 6
2 NVMe 2–32 PCIe 5
3 NVMe 4–53 PCIe 4
4 Power4 Power connector 2_A
5 NVMe 6–75 PCIe 3
6 NVMe 8–96 PCIe 2