Processor NeptuneTM Core Module
Use this section to understand the cable routing of the Processor NeptuneTM Core Module (NeptCore).
For the locations of the leakage detection sensor module connector on the processor board, see System-board-assembly connectors for details.
Note
For better cable arrangement, it is required to install the hoses and leakage detection sensor module to a designated holder, and make sure that the module is secured in holder clips. Use the illustration below or Install the Lenovo Processor NeptuneTM Core Module for details.
Figure 1. Cable routing for NeptCore module
| From | To |
|---|---|
| 1 Leak detection cable | 1 Front leak detection connector |
Give documentation feedback